Question 2 about 300-410
When configuring Control Plane Policing on a router to protect it from malicious traffic, an engineer observesthat the configured routing protocols start flapping on that device. Which action in the Control Plane Policy
prevents this problem in a production environment while achieving the security objective?
A. Set the conform-action and exceed-action to transmit initially to test the ACLs and transmit rate and apply
the Control Plane Policy in the output direction
B. Set the conform-action and exceed-action to transmit initially to test the ACLs and transmit rate and apply
the Control Plane Policy in the input direction
C. Set the conform-action to transmit and exceed-action to drop to test the ACLs and transmit rate and apply
the Control Plane Policy in the output direction
D. Set the conform-action to transmit and exceed-action to drop to test the ACLs and transmit rate and apply
the Control Plane Policy in the input direction
I don‘t understand the difference between drop to test and transmit initially to test ACL. Please give us your opinions and solutions. Thank you!!!
About control plane policy
https://siqilab.com:44305/data/attachment/forum/202105/23/131939iceqofz8fi2l85lh.png
Pages:
[1]